Product model: W3-M
Product name: 13.56MHZ Metal Waterproof Keypad & RFID Access Control/Reader


This Access control is anti-vandal and waterproof design. It support PIN and 13.56MHZ Mifare card, 3 access modes optional. Wiegand 26/34 output & input make it can be used as controller and slave reader. It usually installed on the courtyard, bank, prison etc. where need hign level security.

  • Metal structure, anti-vandal, more secure, waterproof design.
  • Pulse mode, toggle mode.
  • User Capacity: 1,500 users +10 group duress PIN/Card.
  • Support 3 Modes Access: Card, PIN, Card+PIN
  • Card Type: 13.56MHz IC/CPU cards, PIN length: 4-6 digits.
  • Very Low Power Consumption ( ≤35mA), long service life and stable performance.
  • Wiegand 26 or 34 bit input & output can be programmed.
  • Can be used as standalone Wiegand output reader.
  • Can connect extra EM/IC/HID EM / IC / HID Wiegand output reader.
  • Backlight keypad.
  • With a control electrical switch signal setting.
  • Protective Properties: IP65 fully-potted.
  • With anti-dissssemble, alarm function, anti-static interference 15KV.
Specs Parameter
  • Operating Voltage: 12-18V AC/12-24V DC
  • Adjustable Door Relay Time: 1-99s
  • Static Current: ≤35mA
  • Wiegand Interface: Wiegand 26 or 34 output
  • Card Read Rang: 3-6cm
  • Reader Induction Time: ≤0.1s
  • Operating Temperature: -40℃~60℃
  • Operating Humidity: 0-95%
  • Lock Output Load: ≤1A
  • Alarm Output Load: ≤3A
  • Antistatic: 15KV
  • Environment: conforms to IP65
  • Wiring Length: 90-100cm
  • Dimensions: 128mm× 82mm× 28m